Automatic Watering System for Oil Palm Seeds
Abstract
Nursery of oil palm is a period of preparing oil palm for approximately 3 months. However, in watering still using the manual method, this method still has a weakness, namely by pulling the water hose so that farmers of oil palm have to work hard and drain energy and also take a long time. From these problems, a solution was made by making an automatic palm seed watering system using the rtc module as the scheduling of the watering system and NodeMCU as the brain of the system's main process and using the blynk application as a notification output in the form of messages. As a result, the automatic watering system can work optimally if the time of the watering process has been determined and the system is able to send notifications to the blynk and display messages on the results of the watering process, with this automatic watering system it can help the work of oil palm nursery farmers.
References
[2] Zulfian Azmi, Muhammad Zarlis, Herman Mawengkang, Syahril Efendi “Control the Water wheel with the Internet of Things”, Journal of Physics Conference Series,’Volume 1361 1st International Conference of SNIKOM 2018 23-24 Nopember 2018.Medan, Indonesia.
[3] A. Sinaga, U. N. Padang, J. Prof, and H. Air, “Rancangan Alat Penyiram Dan Pemupukan Tanaman Otomatis Menggunakan RTC Dan Soil Moisture Sensor Berbasis Arduino,” vol. 1, no. 2, pp. 150–157, 2020.
[4] M. S. Novelan, “Penerapan NodeMCU Terhadap Pemberitahuan Banjir dengan Menggunakan Metode GAMMU,” InfoTekJar J. Nas. Inform. dan …, vol. 1, pp. 4–7, 2020, [Online]. Available: https://jurnal.uisu.ac.id/index.php/infotekjar/article/view/2974.
[5] A. Satriadi, Wahyudi, and Y. Christiyono, “Perancangan Home Automation Berbasis NodeMCU,” Transient, vol. 8, no. 1, pp. 64–71, 2019, [Online]. Available:
[6] S. P. Tamba, A. H. M. Nasution, S. Indriani, N. Fadhilah, and C. Arifin, “Pengontrolan Lampu Jarak Jauh Dengan Nodemcu Menggunakan Blynk,” J. Tek. Inf. dan Komput., vol. 2, no. 1, pp. 93–98, 2019.
[7] Verdi, Y. (2012). Rekayasa Perangkat Lunak Berorientasi Objek (Object-Oriented Software Engineering: Modeling, architecture and Design). In Indonesian (1st ed.). Mitra Wacana Media. https://www.mitrawacanamedia.com/kategori-komputer- it/rekayasa-perangkat-lunak-berorientasi-objek. ISBN: 978-602-7523-45-6
[8] Verdi, Y., Muhammad, Z., Opim, S. S., & Potak, S. (2020). Hierarchy of Grid Partition (HGP) Integrating data in Software Engineering and databases. International Conference on Applied Sciences, Information and Technology 2019. https://doi.org/10.1088/1757-899X/846/1/012024
[9] Verdi, Y., Muhammad, Z., Opim, S. S., & Potak, S. (2019). Big data measurement model in achieving maximum accuracy using the model Hierarchy of Grid Partition (HGP) method. The 3rd International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM, 7281-2475-978-1
[10] Verdi, Y., Muhammad, Z., Opim, S. S., & Potak, S. (2021). Measurement Model In Optimizing The Certainty Of Accurate Data Similarity With The Hierarchy Of Partition Grid Method (HGP). “Nat. Volatiles & Essent. Oils, 2021; 8(4): 11811- 11834” E-ISSN: 2148-9637 URL: https://www.nveo.org/index.php/journal/article/view/2457
[11] Zulfian, A., & Verdi, Y. (2017). Pengantar Sistem Pakar dan Metode. In Introduction to Expert Systems and Method) in Indonesian (1st ed.). Mitra Wacana Media. https://www.mitrawacanamedia.com/kategori-komputer-it/pengantar-sistem-pakar- dan-metode
[12] Zulfian, A., & Verdi, Y. (2021). Pengantar Jaringan Saraf Tiruan Dan Implementasi (Introduction To Artificial Neural Networks And Implementation) in Indonesian (1st ed.). Mitra Wacana Media. ISBN: 978-602-318-479-8 URL: https://www.mitrawacanamedia.com/kategori-komputer-it/pengantar-jaringan-saraf- tiruan
This work is licensed under a Creative Commons Attribution 4.0 International License.
